Replacing The Power Supply - Gigabyte G293-S42 User Manual
Hpc server - 4th gen intel xeon scalable server - 2u dp 8-gpu nvme/sata/sas, hpc server - 4th gen intel xeon scalable server - 2u dp 4-gpu nvme/sata/sas, hpc server - 4th gen intel xeon scalable server - 2u dp 8-gpu nvme/sata/sas, hpc server - 4th gen int
Table of Contents
Advertisement
3-9
Replacing the Power Supply
CAUTION!
• In order to reduce the risk of injury from electric shock, disconnect AC power from the power
supply before removing it from the system.
Follow these instructions to replace the power supply:
1.
Pull up the power supply handle and press the retaining clip on the right side of the power supply
along the direction of the arrow.
2.
At the same time, pull out the power supply using the handle.
3.
Insert the replacement power supply firmly into the chassis. Connect the AC power cord to the
replacement power supply.
CAUTION!
• Please see the illustration below for installation sequence.
1
2
3
Secondary PSU
(PSU2)
System Hardware Installation
Primary PSU
(PSU1)
- 50 -
Advertisement
Table of Contents
