Network Stack Configuration - Gigabyte G293-S42 User Manual
Hpc server - 4th gen intel xeon scalable server - 2u dp 8-gpu nvme/sata/sas, hpc server - 4th gen intel xeon scalable server - 2u dp 4-gpu nvme/sata/sas, hpc server - 4th gen intel xeon scalable server - 2u dp 8-gpu nvme/sata/sas, hpc server - 4th gen int
Table of Contents
Advertisement
5-2-6 Network Stack Configuration
Parameter
Network Stack
Ipv4 PXE Support
Ipv4 HTTP Support
Ipv6 PXE Support
Ipv6 HTTP Support
PXE boot wait time
Media detect count
Description
Enable/Disable the UEFI network stack.
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the Ipv4 PXE feature.
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled, Disabled. Default setting is Disabled.
Enable/Disable the Ipv6 PXE feature.
Options available: Enabled, Disabled. Default setting is Disabled.
Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled, Disabled. Default setting is Disabled.
Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.
Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.
BIOS Setup
- 73 -
Advertisement
Table of Contents
