Table of Contents
Advertisement
Placing the device in operation
Caution!
Transport securing screws
Ensure that the transport securing screws at the top side
of the device are removed before the startup of the de-
vice.
Switching on/off
Switching on/off with the rotary/pushbutton
u For switch-on, press the rotary/pushbutton
u For switch-off , hold the rotary/pushbutton
pressed for more than 2 seconds.
Switching on/off via vehicle ignition
If the car sound system is connected with the vehicle
ignition and it was switched off with the rotary/pushbut-
1
ton
, it is switched on or off with the ignition.
Note:
When switching the device on/off using the ignition,
you can use the Fast Boot function (see chapter "Sys-
tem settings", option General). Fast Boot shortens the
system start of the device to a few seconds.
When enabling Fast Boot, selects the maximum time
period that may pass between switching off the
device and restarting it with fast system start. After
the time period expires, the regular system start is
executed upon switching it on again.
Volume
Adjusting the volume
You can adjust the volume in increments from 0 (off ) to
100 (maximum).
u Turn the rotary/pushbutton
volume.
Muting the car sound system (Mute)
u Briefl y press the rotary/pushbutton
device or to reactivate the previous volume.
1
.
1
1
to change the
1
to mute the
Placing the device in operation | Operation
Operation
Touchscreen
Important note:
Do not use any pointed or hard objects, such as ball
point pens or fountain pens, to operate the touch-
screen.
The device features a capacitive touchscreen that pro-
vides a remote control and device buttons (see the sec-
tion "Controls" at the beginning of these instructions)
and allows operating the device.
Note:
Tap on the "Night Display" app to switch off the dis-
play (the touchscreen goes dark). Tapping on the
touchscreen is suffi cient to return to the current
display.
The "Night Display" app can be reached by tapping
on "Apps" in the main menu.
Tapping
To activate a control, e.g. a button, a slight touching of
the display surface is suffi cient. You do not have to exert
any pressure on the display surface.
•
Short tap:
A short tap on the display surface is suffi cient for
activating most of the controls.
•
Long tap:
Some functions require a long tap. Rest your fi nger-
tip on the display surface for approximately 1 second.
Swiping/scrolling
Some functions require swiping across the display
surface, e.g.
•
scrolling in lists,
•
adjusting sliders.
Tap on the display surface and rest your fi nger on the
surface. Next, move your fi nger over the surface.
Zooming
When displaying maps (navigation) and images, you can
enlarge or reduce the view (zoom):
Tap on the area of the map display with two fi ngers and
rest your fi ngers on the surface. Move your two fi ngers
closer together (zoom out/reduce) or further apart
(zoom in/enlarge).
7
Advertisement
Table of Contents
