Connecting The Water Supply Hose - LG WTP22WY Owner's Manual

• Place the leveling feet of the Main Washer
inside the bracket openings on the Mini
Washer, and align the bracket screw holes.
2
Securely attach the two washer at the corners
using screws.
• First, insert screws on each side. Then insert
screws on the front and back side.
NOTE
• It can be difficult to assemble if it is not
assembled in the proper order, or if the Mini
washer has not been leveled prior to placing the
Main washer on top.
3
Turn the feet of the Main Washer slightly until
they are firmly snug up against the Mini
Washer. Loosen the adjustable feet by turning
them clockwise for a half turn with a spanner.
Then tighten the four lock nuts. All lock nuts
must be tightened.
NOTE
• The Mini Washer will not work as a stand-alone
unit.
Connecting the Water
Supply Hose
Needed Accessories
*1 The included accessories vary depending on the
model you purchased.
a Water Supply Hose(for cold water)
b Connecting Supply Hose and Disassembled
*1
Connector
c Connecting Supply Hose with Assembled
*1
Connector
INSTALLATION
13