Graco 395 233960 Repair Manual page 6

WARNING
Your system must be grounded. Read Warnings,
page 2.
The sprayer requires:
Grounded
Outlets
Grounding Plug
120 VAC
Fig. 2
D 100–120 VAC, 50/60 Hz, 15A circuit with a ground-
ing receptacle.
D
220–240 VAC, 50 Hz, 10A circuit with a grounding
receptacle.
D Do not alter ground prong or use adapter.
D Do not use sprayer if the electrical cord has a
damaged ground prong. Only use an extension
cord with an undamaged, 3–prong plug.
Recommended extension cord lengths:
D 120/240 Vac: 300 ft (90 m) 12 AWG (1.0 mm) , 3
wire with grounding prong
Long lengths reduce sprayer performance.
Spray gun: ground through connection to a properly
grounded fluid hose and pump.
Fluid supply container: follow local codes.
6 309674
Grounding
Grounding Plug
ti3001b
Solvent pails used when flushing: follow local
code. Only use conductive metal pails, placed on
grounded surface such as concrete. Do not place the
pail on a nonconductive surface, such as paper or
cardboard, which interrupts grounding continuity.
Grounding the metal pail: connect a ground wire to
the pail by clamping one end to pail and other end to
ground such as a water pipe.
Maintaining grounding continuity when flushing
or relieving pressure: hold metal part of spray gun
firmly to the side of a grounded metal pail, then trigger
gun.
Fig. 3
Grounded
Outlets
240 VAC
ti6762a