Table of Contents
Advertisement
Changing the speed and temperature settings for auxiliary functions
Depending on the step the programme has reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function selection".
You may also change the speed and temperature settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
1. Press the Start / Pause / Cancel button to switch the machine to pause mode. The
programme follow-up light of the relevant step during which the machine was switched
into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press Start / Pause / Cancel button to start the machine.
C
The loading door will not open if the water temperature in the machine is high or the water
level is above the door opening.
4.6.17 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you
can avoid any changes in a running programme.
C
You can switch on and off the machine with On / Off button when the Child Lock is active.
When you switch on the machine again, programme will resume from where it has stopped.
To activate the Child Lock:
C
Same phrase will appear on the display if you press any button when Child Lock is enabled.
To deactivate the Child Lock:
C
Do not forget to disable the child lock at the end of the programme if it was enabled before.
Otherwise, machine will not allow to select a new programme.
35 / EN
Press and hold 2nd and 4th Auxiliary Function buttons
for 3 seconds. "Con" appears on the display.
Press and hold 2nd and 4th Auxiliary Function buttons
for 3 seconds. "COFF" appears on the display.
Washing Machine / User's Manual
Advertisement
Table of Contents
