Volvo XC90 Recharge Owner's Manual page 329

NOTE
If the automatic speed limiter function
•
is activated, road sign information
(RSI 35 ) is shown in the driver display
even if the Road Sign Information is
not activated.
To remove road sign information from
•
the driver display, you must deactivate
both the automatic speed limiter and
Road Sign Information.
When the automatic speed limiter
•
function is activated but Road Sign
Information is deactivated, no warn-
ings are given from Road Sign Infor-
mation. Road Sign Information must
also be activated in order to receive
warnings.
35 Road Sign Information
36 Automatic Speed Limiter
Deactivating the automatic speed
limiter
To deactivate the automatic speed limiter:
Tap on the button in the function view.
–
> GREY button indication – ASL is
switched off and SL is activated
instead.
WARNING
After switching from ASL to SL the car will
no longer follow the signed speed limit but
only the stored maximum speed.
Related information
Speed limiter (p. 322)
•
Automatic speed limiter (p. 325)
•
Limitations for automatic speed limiter
•
(p. 328)
Road Sign Information* (p. 315)
•
DRIVER SUPPORT
Changing the tolerance for the
automatic speed limiter
The Automatic Speed Limiter function
36
(ASL ) can be set for different tolerance lev-
els. The tolerance is adjusted in the same way
as the speed setting is in the speed limiter.
If, for example, the car follows a signed speed
limit of 70km/h (43 mph) the driver can
instead choose to allow the car to maintain
75 km/h (47 mph).
Buttons and symbols for the function
* Option/accessory.
}}
327