Attaching The Diversity Receiver To A Camera - Sennheiser evolution wireless G4 100 P Series Instruction Manual

Attaching the diversity receiver to a camera

You can attach the diversity receiver on the hot shoe of the camera with the
included CA 2 camera kit.
To attach the EK 100 G4 diversity receiver to a camera:
▷ Determine where on the perforated plate you need to attach the hot
shoe adapter so that the diversity receiver can be optimally attached to
the camera.
▷ Place a square nut under the perforated plate at this position.
Affix the hot shoe adapter to the perforated plate with the square nut.
▷
▷ Lift the belt clip.
Press one side of the clip downward on the fixing hole and pull it out of
▷
the housing.
Do the same thing on the other side.
▷
Installing the EK 100 G4
21