Operation - Beko BEKOKAT CC-720 Installation And Operation Manual

Installation and Operation Manual BEKOKAT
5.3

Operation

NOTE Safe operation
 The assembly unit must only be operated and serviced according to
 In addition to these instructions, always comply with the required
 This also applies to the use of accessories and spare parts.
 Non-compliance with these installation and operating instructions
WARNING Operation of plant outside limit range
If the specified limits are undershot and/or exceeded, then function and
operating malfunctions could occur and cause danger for people and
material.


58 / 88
the information in the operating instructions to ensure safe operation.
statutory regulations for the application cases for system operation
and company safety regulations as well as accident prevention
regulations.
can cause hazards for people and the plant.
®
BEKOKAT may only be used in accordance with its intended use
and within the permitted limiting values stated on the rating plate as
well as in the technical data.
The maximum compressed air volume flow at the inlet of the
®
BEKOKAT plant must not exceed 720 m³/h (refer to the data on the
rating plate as well as in the technical data).
®
V01 /11-038