Table of Contents
Advertisement
en Familiarising yourself with your appliance
Remove any accessories that are not being used from
the cooking compartment.
¡ Accessories that are not being used do not need to
be heated.
Allow frozen food to defrost before cooking.
¡ This saves the energy that would otherwise be re-
quired to defrost it.
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
1
Display
The display shows the current adjustment val-
ues, options or notes.
Use the
and
buttons to navigate in the dis-
play.
→ "Display", Page 6
2
Buttons
You can use the buttons to set various func-
tions directly.
→ "Buttons", Page 7
4.2 Display
The display is divided into different areas.
Status bar
The status bar is at the top of the display.
You can carry out actions depending on the setting
step.
In addition to the text information, you can see the cur-
rent status of different functions using symbols.
Symbol
Meaning
Time, e.g.
Display of the current time-setting op-
"12min10s"
tions.
6
1
2
Switch off the display in the basic setting → Page 15.
¡ Energy is saved when the display is switched off.
Note:
The appliance requires:
¡ A maximum of 2 W in networked standby mode
¡ A maximum of 1 W in non-networked standby mode
with the display switched on
¡ A maximum of 0.5 W in non-networked standby
mode with the display switched off
Symbol
Meaning
Timer is activated.
→ "Setting the timer", Page 13
Childproof lock is activated.
→ "Childproof lock", Page 15
The appliance door is locked due to the
cleaning function or childproof lock.
→ "Basic settings", Page 15
WiFi signal strength for Home Connect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through
is no WiFi signal.
If there is an "x" at the symbol
is no connection to the Home Connect
server.
→ "Home Connect ", Page 16
Remote start with Home Connect is ac-
tivated.
→ "Home Connect ", Page 16
Remote diagnostics with Home Con-
nect for maintenance is activated.
→ "Home Connect ", Page 16
The oven light is on or off.
→ "Lighting", Page 7
Settings area
The settings area is shown in tiles.
The individual tiles show you the current selection op-
tions and settings that have already been implemented.
To select a function, press the corresponding tile.
Information is also shown in tiles.
To scroll to the left or right if there are several tiles, use
the navigation buttons
Possible symbols in tiles
Symbol
Meaning
Scroll if there is a lot of content in the
tile.
Decrease or increase the adjustment
value.
Reset the adjustment value.
Close the tile.
Note: A blue dot or a blue star in a tile indicates that a
new function, a new favourite or an update was down-
loaded to your device using the Home Connect app.
, there
and .
, there
Advertisement
Table of Contents
