Welcome Congratulations on purchasing a Plantronics headset. This guide contains instructions for setting up and using your Plantronics Explorer ® 370 headset. Please refer to the separate Safety Instructions booklet for important product safety information prior to installation or use of the product.
How to Charge Your Headset Using the AC Charger ... 2 Pairing Your Headset Plantronics QuickPair How to Pair Your Phone With Your Headset for the First Time ... 4 How to Pair Your Headset if it Has Been Previously Paired With Another Device ... 5...
Bluetooth range is up to 33 feet (10 meters). Obstructions such as walls or other electronics devices can cause interference or shorten the effective range. NOTE For optimal performance, place your headset and phone on the same side of your body.
Package Contents and Features Plantronics Explorer Vehicle Charging Adapter #76777-01 * Not included. To order, please contact your Plantronics supplier or go to www.plantronics.com Call Control Button (On/Off) Indicator Light Volume Control Swivel Earloop Microphone Eartip Charging Jack Accessories* ®...
Charging Your Headset How to Charge Your Headset Using Only the AC Charger Before using your headset for the first time, charge it for at least 20 minutes. A full charge takes approximately two hours. Connect the AC charger to a power outlet.
Before using your headset for the first time, you must pair it with your Bluetooth phone. Normally you need to pair your headset with your phone only once. To see a demo of the pairing process, visit www.plantronics.com/ EasyToPair. Plantronics QuickPair Technology ™...
The headset is now in pairing mode. If you don’t see the red/blue flash, press and hold the call control button to turn your headset off, and then press and hold the call control button again until you see the red/blue flash.
How to Pair Your Headset if it Has Been Previously Paired With Another Device Turn the headset off. Press and hold the call control button until the indicator turns red and then turns off. Turn the headset on. Press and hold the call control button until the indicator flashes red/blue.
Place the ear loop behind your ear. Rotate the headset so that the eartip rests comfortably in your ear. Align the microphone with the corner of your mouth.
Attaching the Optional Lanyard WARNiNG Certain activities may pose a risk of injury, including strangulation, if the lanyard should become wrapped around your neck. Use the lanyard with caution.
Briefly press the call control button. When you receive a call, your phone may ring before your headset rings. Wait until you hear the ring in your headset before you press the call control button to answer the call. Reject a call Press the call control button for 2 seconds.
Audio quality degrades as you move out of range. When you are far enough away to lose the connection, you hear a high tone in the headset. The headset attempts to reconnect after 30 seconds. If you move back in range, you can manually reconnect by pressing the call control button.
Powering on Powering off Charging battery Low battery Pairing mode Missed call Ringing Headset Indicator Light Blue flashes. Repeat. Red appears and goes off. Red solid light. Red flashes. Blue/red flashes. Purple flashes. Single press the call control button to cancel.
To activate last number redial, double press the call control button. You will hear a high tone after each double key press. With the headset on, press the call control button for 2 seconds to activate the voice dialing. NOTE...
Incorrect menu selections were made on your mobile phone. Repeat the pairing process on page 4. The headset is not turned on. Press the call control button for 2 seconds until you hear a beep or see the indicator light glow blue to turn headset on.
Up to Bluetooth standard 33 feet (10 meters) Power Requirements 5V DC – 180 mA Battery Type Lithium ion polymer Storage/Usage 32F – 120F (0C – 48C) Temperature Version Bluetooth 2.0 Supports Bluetooth hands-free and headset profiles. * Battery enabled. Performance may vary by device. Product Specifications...
Limited Warranty This warranty covers defects in materials and workmanship of products manufactured, sold or certified by Plantronics which were purchased and used in the United States. The warranty lasts for one year from the date of purchase of the products.
Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information. NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment. US FCC REQUIREMENTS PART 15 This device complies with Part 15 of the FCC Rules.
Page 20
Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and logo are owned by Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the Explorer 370 Rugged and is the answer not in the manual?
Questions and answers