Table of Contents
Advertisement
Problem
Possible causes and solutions
The image is
• If the lens has dirt on it such as
blurred.
fingerprints, clean the lens.
• Make sure that the AF frame is green
before taking a photo.
The camera
• There may be a temporary malfunction.
does not work
Please press the reset button. If it still does
properly.
not work properly, please contact our
repair service center for repair.
• The battery may be exhausted. Please
charge the camera.
The film pack
• Please use FUJIFILM instant film "INSTAX
does not load or
mini" (other films cannot be used).
does not load
• Align the yellow mark on the film pack
smoothly.
with the yellow alignment mark on the
camera body to load the film.
The film does
• The film may be misaligned due to shocks
not unload.
such as vibration or dropping. Please load
a new film pack.
• If the film is jammed, turn off the camera
and turn it on again. If the problem
persists, remove the jammed film and
then load a new film pack.
Some or all of
Do not open the film door until all film
the finished
exposures have been used. Unexposed film
prints are white.
will be prematurely exposed if the door is
opened. Prematurely exposed film will be
white with no images.
The print is
• Do not shake, bend, fold or hold the print
uneven.
immediately after it is printed.
• Do not obstruct the film ejection slot.
26
IMPORTANT SAFETY NOTICE
This product has been designed to ensure the safety of the user
when handled correctly in accordance with the User's Guide and
the instructions provided. It is important that both the product
and the "instax mini" film are handled properly and used only to
print pictures as instructed in the User's Guide and in the "instax
mini" film instructions. For future reference keep the User's Guide
in a safe, easy place.
This symbol indicates danger, which could result in injury or death.
Please follow these instructions.
If any of the following instances occur, immediately unplug
the dedicated charging cable, turn the camera off and cease
use�
• The camera becomes hot, emits smoke, emits a burnt smell or
is functioning abnormally�
• The camera is dropped into water or any foreign objects enter
the camera�
This device contains a built-in battery� Do not subject it to
heat, throw it into an open fire, drop or subject to impact�
Doing so could cause the camera to explode�
Never attempt to take this product apart. You may be injured.
If the camera is not functioning correctly, to avoid injury do not
attempt to repair yourself.
If this product is dropped or damaged so that the internals are
visible, do not touch it. Contact your FUJIFILM dealer.
Do not touch any parts within the inside of the back cover. This
may cause injury.
Never get this product wet or handle it with wet hands. Doing
so may result in an electric shock.
Promptly unplug the dedicated charging cable once battery is
fully charged.
Keep out of the reach of small children. This product could
cause injury in the hands of a child.
Do not cover or wrap the camera or the AC power adapter in a
cloth or blanket. This can cause heat to build up and distort the
casing or cause a fire.
The "CE" mark certifies that this product satisfies the
requirements of the EU (European Union) regarding
safety, public health, environment and consumer
protection. ("CE" is the abbreviation of Conformité
Européenne.)
Hereby, FUJIFILM declares that the radio equipment type "FI019" is
in compliance with Directive 2014/53/EU.
For more information, access the website below.
https://instax.com/mini_evo/en/spec.html
WARNING
WARNING
WARNING
Advertisement
Table of Contents
