Plantronics Discovery 650e User Manual page 6

PAIRING
1.
If headset has been previously paired with another device, please follow these
instructions for pairing a second time. Be sure the headset is fully charged. For
set up and pairing instructions with other Bluetooth devices, please consult your
Bluetooth device user guide or visit www.plantronics.com/easytopair–an online,
interactive pairing guide for phones and headsets.
Begin with headset turned off.
1. Press and hold down the call
control button for 10 seconds until
the headset status indicator begins
to flash red then blue.
The headset is now in pairing
mode for the next 120 seconds.
TO DISABLE ONLINE AND STANDBY
INDICATOR LIGhTS
When purchased the headset will have the online and standby indicator lights enabled.
To disable these indicators, press the volume up button while turning the headset
ON. To re-enable both indicator lights, turn the headset off; then press the volume up
button again while turning the headset ON.
NOTE: This process only disables online and standby indicator lights when headset is
connected to mobile phone. All other indicator lights, such as low battery, will continue
to function.

2.
2. While the headset is flashing,
use the phone menu to search
for Bluetooth devices and select
"6XXPlantronics."
3. When prompted for a passkey,
enter 0000. Headset will flash
blue when paired successfully.
3.