Multipoint - Plantronics Discovery 650e User Manual

MULTIPOINT

USING MUL TIPOINT (MORE THAN ONE
BLUETOOTH DEVICE)
Plantronics Discovery 650 supports
multipoint technology, which permits
simultaneous connections with two
different Bluetooth audio devices.
TO PAIR ANOTHER BLUETOOTH DEVICE
Repeat the previous pairing steps with
the new device.
INITIATE A CALL The headset will
assume you wish to initiate a call
on the device recently used.
To use the second device initiate the call
using the controls on the second device.
The second device forms the link with
the headset.
ANSWER A CALL An incoming call
on either device will ring through the
headset. In most cases, the ring tone
from the device will transfer through
to the headset, allowing the user to
determine which device is ringing.
In some cases, however, the headset
applies a ring tone to the incoming call.
In either case, the user will be able
to determine which device is ringing
through the distinct ring tone.
To answer the call, press the call
control button.
TO ANSWER A CALL ON ONE DEVICE
WHILE TALKING ON THE OTHER
There is no function for placing one
call on hold while answering another.
Therefore, to answer the second call,
the first call must be terminated.
Terminate the first call by pressing
the call control button once.
Wait for the beep and then answer
the second call by pressing the call
control button again. If you choose
not to answer the second call, and
you have voice mail on the second
device, the call will go to voice mail.
11