Storage; Description; Areas Of Application; Design - HADEF 53/22A Installation, Operating And Maintenance Instruction

3.3

Storage

 Store the equipment at a clean and dry place.
 Protect the equipment against dirt, humidity and damage by an appropriate cover.
 Protect hooks, wire ropes, chains and brakes against corrosion.
4

Description

4.1

Areas of application

The devices must be as far as possible installed in a covered room.
If they are used in the open, protect the units against the effects of weather such as rain, hail, snow, direct
sunshine, dust, etc. - we recommend to use a cover in parking position. If the device is set up in a
continuously humid environment with strong temperature fluctuations, the correct functionings are
endangered by the forming of condensation.
NOTICE!
Use only in the intended atmosphere with a humidity of up to 100%, but not under water!
DANGER!
In particular, use is not permitted:

for tearing loose fixed loads, dragging of loads as well as diagonal pulling
 for pulling against a fixed point without additional safety and/or measuring equipment against exceeding
the nominal load
 in potentially explosive atmospheres, unless the equipment has been modified for this purpose and
this is shown on special type plates it carries for this purpose.

in reactor containments

for transporting persons

for holding lifted loads

for scenic use

when persons are under suspended loads
4.2

Design

HADEF ratchet lever hoists are compact hoists
with suspension hook for stationary use.
4.3

Functions

The load is lifted, lowered or tensioned by operating the lever. The load pressure brake prevents automatic
lowering of the load.
NOTICE!
If used "overhead" or "lashing" undefined forces may appear. We recommend to use a hoist with
5.52.187.00.01.10
Illustration 2
7