Download Print this page

W Audio RM 10 User Manual

Twin handheld vhf radio microphone system (173.8mhz/175.0mhz)

Advertisement

Quick Links

RM 10 Twin Handheld VHF
Radio Microphone System
(173.8Mhz/175.0Mhz)
User Manual
Order code: MIC62

Advertisement

loading

Summary of Contents for W Audio RM 10

  • Page 1 RM 10 Twin Handheld VHF Radio Microphone System (173.8Mhz/175.0Mhz) User Manual Order code: MIC62...
  • Page 2: Safety Advice

    • Repairs, servicing and power connection must only be equipment is not in use or before cleaning! Only handle carried out by a qualified technician. THIS UNIT CONTAINS the power-cable by the plug. Never pull out the plug by NO USER SERVICEABLE PARTS. pulling the power-cable. • This fixture is for professional use only - it is not designed • Make sure that the available voltage 12-15V DC, 300mA. for or suitable for household use. The product must be (240V AC~50Hz power supply included) installed by a qualified technician in accordance with local territory regulations. The safety of the installation is the • Make sure that the power cable is never crimped or responsibility of the installer. The fixture presents risks of damaged. Check the equipment and the power cable severe injury or death due to fire hazards, electric shock periodically. and falls. • If the equipment is dropped or damaged, disconnect the • WARRANTY: One year from date of purchase. mains power supply immediately and have a qualified engineer inspect the equipment before operating again. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. In case of malfunction this unit should be returned for service or inspection. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk RM 10 User Manual...
  • Page 3 Product overview & technical specifications RM 10 Twin Handheld VHF Radio Microphone System The W Audio RM 10 is a dual channel, VHF wireless microphone system supplied with receiver and 2 handheld microphone transmitters. Suitable for mobile entertainers and small venues, the system is supplied in a foam lined ABS case for protection during transportation. Each mic requires 2 x 1.5V AA batteries not supplied. • 2 x XLR outputs plus 1 x 6.35mm jack mixed output • 6.35mm (1/4”) jack to jack patch cable • UK mains PSU • Foam lined, ABS carry case Specifications RM 10 VHF Radio Microphone System In the box: Operating frequency 173.8Mhz/175.0Mhz 1 x receiver, 1 x audio lead,...
  • Page 4 2. RF Signal Indicator: The LED RF Signal indicator will illuminate amber when the receiver unit receives a valid RF. 3. Volume Control: The receivers output volume is adjustable. Turn the level control anti clockwise to the lowest setting, or turn clockwise to adjust to the highest setting. 4. Power Switch: On/Off control for the receiver unit. Receiver rear panel identification: 1. Antenna: The antenna receives the RF radio signal from the transmitter unit. For optimum reception, orientate vertically. Reception maybe impaired by obstacles between the transmitter and receiver. High power electrical equipment can cause unwanted interference. 2. Balanced Audio Outputs: Individual, balanced audio outputs via 3 pin XLR for each of the two audio channels. 3. Audio (MIX) Output: 6.35mm (1/4”) jack socket outputting an unbalanced, 400mV line level audio output featuring both audio channels. 4. DC Power Input: The receiver is powered by a standard DC power input 12-15V DC, 300mA regulated voltage supply. www.prolight.co.uk RM 10 User Manual...
  • Page 5 Operating instructions Handheld transmitter identification: 1. Grille 2. Power switch 3. Power indicator 4. Battery status indicator 5. Mute switch 6. Battery cover www.prolight.co.uk RM 10 User Manual...
  • Page 6: Operation

    Only use high quality, alkaline type batteries. Refit the battery compartment cover carefully. • Switch on the transmitter, during switch on the battery light on the transmitter should come on. If the transmitter is low on battery the green light illuminates permanently and the battery will require replacement. • Adjust the volume on the front panel of the receiver for each of the channels. NOTE: The RM 10 system is shipped with two handheld transmitters. The receiver in this system features a dual channel receiver allowing both handheld microphones to be used simultaneously. Troubleshooting: Problem Possible cause Solution Receiver – no sound Power button is in the OFF position. DC power adapter Turn on the power button plug in the power adapter is not plugged in Receiver – no LED Mic transmitter is out of range. Mic is switched off. Mic Ensure that the mic is within range. Turn on the mic switch. Microphone - no sound volume it turned down. Batteries in mic are not installed Turn up the mic volume on the receiver. Reinstall or use new but LED indicators are lit properly. Receiver is not connected to an amp or mixer. batteries. Connect an output cable to an amp or mixer The 4 mics may be too close together. Batteries are running Increase the distance between mics. Replace the batteries. Distorted sound or feedback out of charge. Mic volume may be too high. Possible Reduce the volume. Move the system away from other interference from another source. electric sources. www.prolight.co.uk RM 10 User Manual...
  • Page 7: Weee Notice

    WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk RM 10 User Manual...
  • Page 8 RM 10 User Manual...

This manual is also suitable for:

Mic62