Installation Order; Determining The Board's Part Number And Revision - Planar DOME Md5/PCX Installation Manual

Planar md5/pcx display controllers: install guide
Hide thumbs Also See for DOME Md5/PCX:
Table of Contents

Advertisement

6 | Planning the Installation

Installation order

This table describes the board and driver installation order for
each operating system.
For this
operating
system...
Windows NT 4.0 Board as described on
Windows 2000
Solaris 2.5.1 or
later

Determining the board's part number and revision

Check the sticker with the CE mark on the video connector. The
part number has this form:
55-MD5PCX1- xx or 55-MD5PCX2 -xx
where xx is the revision number. For example, if your board's
sticker reads 55-MD5PCX2-32, you are using a revision-32 board.
First install the...
page 8
Board as described on
page 8
Board as described on
page 77
Then install the...
Driver as described on
page 19
Driver as described on
page 41
Driver as described on
page 86

Advertisement

Table of Contents
loading

Table of Contents