Planar DOME Md4/PCI Installation Manual page 55

Installing the Md4/PCI Board in a PC
Click No if the test bitmap did not display correctly.
If No, the Testing Mode dialog box appears,
prompting you:
Please try different settings for your display.
Click OK. Repeat steps 6–9, using a different resolution
and refresh rate.
8. Select Large Fonts (if desired) in the Font Size area.
Selecting Large Fonts on the Settings tab does not
make a significant difference in font size at very high
resolutions. The DOME driver installs extra-large
fonts in your
fonts to your display properties, see "DOME large
fonts" on page 48.
9. Click OK.
The display resolution is now set properly for the
Md4/PCI board.
This message appears:
Do you want to restart your computer now?
10. Click No.
You can now change your display properties using the
DOME tab.
11. Right-click the desktop, and select Properties ->
DOME tab.
A dialog box prompts you to choose a configuration file
(because the system is currently in VGA mode).
12. Click Open to use the default configuration file
(
md4pci.cfg
directory. To add those
C:\dome\tools
) on your system.
39