Planar DOME Md4/PCI Installation Manual page 2

Copyright © DOME ® imaging systems, inc., 2000. All rights reserved.
This document contains proprietary information of DOME imaging systems, inc. It is
DOME's exclusive property. It may not be reproduced or transmitted, in whole or in part,
without a written agreement from DOME. No patent or other license is granted to this
information.
The software, if any, described in this document is furnished under a license agreement.
The software may not be used or copied except as provided in the license agreement.
DOME imaging systems, inc. provides this publication as is without warranty of any kind,
either express or implied, including but not limited to the implied warranties of merchant-
ability or fitness for a particular purpose. DOME may revise this document from time to
time without notice. Some states or jurisdictions do not allow disclaimer of express or
implied warranties in certain transactions; therefore, this statement may not apply to you.
Information in this document about products not manufactured by DOME is provided
without warranty or representation of any kind, and DOME will not be liable for any
damages resulting from the use of such information.
DOME imaging systems, inc.
400 Fifth Avenue
Waltham, MA 02451-8738
(781) 895-1155 phone
(781) 895-1133 fax
Internet address for documentation: techpubs@dome.com
Internet address for product information:
i
nfo@dome.com
Internet address for sales: sales@dome.com
Internet address for technical support: support@dome.com
World Wide Web site: www.dome.com
Part No. 40-MD4PCI-12
Product No. 55-MD4PCI2
October 2000
DOME and the DOME logo are registered trademarks, and Calibration TQA, DIMPL,
DimplX, DimFileX, Luminance Calibration System, Md2/PCI, Md4/PCI, Md5/PCI, and
Md8/PCI are trademarks of DOME imaging systems, inc. Digital and Alpha are trade-
marks of Digital Equipment Corporation. Microsoft, ActiveX, DirectDraw, MS-DOS,
Win32, Windows, and Windows NT are trademarks of Microsoft Corporation. Intel is a
trademark of Intel Corporation. Number Nine and Imagine 128 are trademarks of Number
Nine Visual Technology. Sun, OpenWindows, and Solaris are trademarks of Sun Micro-
systems, Inc. SPARCstation is licensed exclusively to Sun Microsystems, Inc. by SPARC
International. UNIX is a trademark of UNIX System Laboratories. VGA is a trademark of
International Business Machines Corporation. X Window System is a trademark and
product of the Massachusetts Institute of Technology.