AEG BPS356061M User Manual page 6

Hide thumbs Also See for BPS356061M:
Table of Contents

Advertisement

Do not share your Wi-Fi password (if
applicable).
To prevent damage or discoloration to the
enamel:
• do not put ovenware or other objects in
the appliance directly on the bottom.
• do not put aluminium foil directly on the
bottom of cavity of the appliance.
• do not put water directly into the hot
appliance.
• do not keep moist dishes and food in the
appliance after you finish the cooking.
• be careful when you remove or install the
accessories.
Use a deep pan for moist cakes. Fruit juices
cause stains that can be permanent.
Discoloration of the enamel or stainless steel
has no effect on the performance of the
appliance.
Clean regularly the appliance to prevent the
deterioration of the surface material.
Before maintenance, deactivate the appliance
and disconnect from the mains. Do not clean
the catalytic enamel (if applicable) with
detergents.
Make sure the appliance is cold. There is the
risk that the glass panels can break. Replace
immediately the door glass panels when they
are damaged. Contact the Authorised Service
Centre.
Clean the appliance with a moist soft cloth.
Use only neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.
Do not clean the catalytic enamel with
detergents (if applicable).
If you use an oven spray, follow the safety
instructions on its packaging.
Concerning the lamp(s) inside this product
and spare part lamps sold separately: These
lamps are intended to withstand extreme
physical conditions in household appliances,
such as temperature, vibration, humidity, or
are intended to signal information about the
operational status of the appliance. They are
not intended to be used in other applications
and are not suitable for household room
illumination.
Use only lamps with the same specifications.
6
ENGLISH
This product contains a light source of energy
efficiency class G.
To repair the appliance contact the
Authorised Service Centre. Use original spare
parts only.
2.3 Pyrolytic cleaning
WARNING!
Risk of Injury / Fires / Chemical
Emissions (Fumes) in Pyrolytic Mode.
Do not start the Pyrolysis if the Plus
Steam button is pressed in ( if
applicable).
Before carrying out the pyrolytic cleaning and
initial preheating remove from the oven
cavity:
• any excess food residues, oil or grease
spills / deposits.
• any removable objects (including shelves,
side rails etc., provided with the product)
particularly any non-stick pots, pans, trays,
utensils etc.
Pyrolytic cleaning is a high temperature
operation that can release fumes from
cooking residues and construction materials,
as such consumers are advised to:
• provide good ventilation during and after
each pyrolytic cleaning.
• provide good ventilation during and after
the first use at maximum temperature
operation.
If there are other appliances installed in the
same cabinet, do not use them at the same
time as the pyrolytic cleaning. It can cause
damage to the oven.
Fumes released from all pyrolytic ovens /
cooking residues as described are not
harmful to humans, including children, or
persons with medical conditions.
Keep away small pets from the appliance
during and after the pyrolytic cleaning and
initial preheating. Birds and reptiles can be
highly sensitive to the temperature changes
and emitted fumes.
Non-stick surfaces on pots, pans, trays,
utensils etc., can be damaged by the high
temperature pyrolytic cleaning operation of all

Advertisement

Table of Contents
loading

Table of Contents