Yamaha YFM700R Owner's Manual page 48

3. Tighten the locknut to the specified torque.
NOTICE: Always tighten the locknut
against the adjusting nut, and then tighten
it to the specified torque.
Tightening torque:
Locknut:
42 N·m (4.2 kgf·m, 31 lb·ft)
Rebound damping force
5
Turn the rebound damping force adjusting screw
in direction (a) to increase the rebound damping
force. Turn in direction (b) to decrease the re-
bound damping force.
(b)
1. Rebound damping force adjusting screw
[ECB00082]
(a)
1
5-23
Rebound damping force settings:
Minimum (soft):
30 click(s) in direction (b)
Standard:
18 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
Compression damping force
Fast compression damping force
Turn the fast compression damping force adjust-
ing bolt in direction (a) to increase the fast com-
pression damping force. Turn in direction (b) to
decrease the fast compression damping force.
(b)
1
1. Fast compression damping force adjusting bolt
(a)
1