Yamaha YFM700R Owner's Manual page 108

1. Coolant drain bolt
2. Gasket
4. Remove the radiator cap.
1
9
1. Radiator cap
5. Remove the coolant reservoir cap.
6. Disconnect the coolant reservoir hose on the
1
2
1. Coolant reservoir cap
2. Coolant reservoir hose
7. After draining the coolant, thoroughly flush
8. Install the coolant drain bolt and its new gas-
Tightening torque:
9-21
coolant reservoir side, and then drain the
coolant from the coolant reservoir.
the cooling system with clean tap water.
ket, and then tighten the bolt to the specified
torque.
Coolant drain bolt:
11 N·m (1.1 kgf·m, 8.1 lb·ft)
1
2