Yamaha YFM700R Owner's Manual page 114

1
3
1
2
1. Bolt
2. Retainer
3. Tailpipe
4. Gasket
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from
9
the spark arrester portion of the tailpipe and
inside of the tailpipe housing.
4
9-27
1
1. Tailpipe
2. Spark arrester
4. Install the gasket, tailpipe, and retainer and
align the bolt holes.
5. Install the bolts and tighten them to the spec-
ified torque.
Tightening torque:
Retainer bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
6. Install the tailpipe cover and align the bolt
holes.
7. Install the bolts and tighten them to the spec-
ified torque.
2