Table of Contents
Advertisement
DMS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
Feature
SFP+ Ports
SFP28 Ports
Description
Compliant with the following standards:
IEEE 802.3ae compliance
•
SFP+ Transceivers Supported:
•
DEM-431XT: 10GBASE-SR Multi-mode,
OM1:33M/OM2:82M/OM3:300M (w/o DDM)
DEM-432XT: 10GBASE-LR Single-mode, 10 km (w/o DDM)
•
DEM-433XT: 10GBASE-ER Single-mode, 40 km (w/o DDM)
•
•
DEM-434XT: 10GBASE-ZR Single-mode, 80 km (w/o DDM)
DEM-435XT: 10GBASE-LRM Multi-Mode, 200M (w/o DDM)
•
DEM-436XT-BXD: 10GBASE-LR Single-mode, 20 km (TX-1330/RX-
•
1270 nm) (w/o DDM)
•
DEM-436XT-BXU: 10GBASE-LR Single-mode, 20 km (TX-1270/RX-
1310 nm) (w/o DDM)
•
DEM-410T: 10G copper CAT6A, 30m
SFP+ Direct Attached Cables (DAC) Supported:
DEM-CB100S: 1 m 10G SFP+ Direct Attach Cable (DAC)
•
•
DEM-CB300S: 3 m 10G SFP+ Direct Attach Cable (DAC)
DEM-CB700S: 7 m 10G SFP+ Direct Attach Cable (DAC)
•
Compliant with the following standards:
•
IEEE 802.3ae compliance
•
IEEE 802.3by compliance
SFP28 Transceivers Supported:
DEM-S2801SR: 25G SFP28 Multi-Mode 100 m transceiver
•
•
DEM-S2810LR: 25G SFP28 Single-Mode 10 km transceiver
SFP28 Direct Attached Cables (DAC) Supported:
DEM-CB100S28: 1 m 25G SFP28 Direct Attach Cable (DAC)
•
47
Advertisement
Table of Contents
