Motorola MG7315 User Manual page 58

What if I don't know my MG7315's Wireless Network
Name/SSID or Security Key/Password?
The default values are printed on the bottom label of the MG7315. Use these
unless you changed them. If you changed them, try to remember where you
put the new values. If you have a device that connects wirelessly to the
MG7315, it may show the Wireless Network Name/SSID and Password. You
can also find this information in the MG7315 Configuration Manager.
Information about using this is in the Configuration Manager section above.
If all else fails, reset the device to factory defaults by holding the Reset
button for 10 seconds. You can then use the default values.
What if I think that wireless devices are interfering with
my MG7315 wireless router?
1. Where possible, put the MG7315 as far away as possible from interfering
devices such as Bluetooth transmitters and neighbors' Wi-Fi routers.
2. To try to pick a less used wireless channel for your MG7315, first go in to
your MG7315's Configuration Manager.
3. Click the Advanced button at the top of the page, then click the Wireless
and Scan/Bridge menu items at the top of the page.
4. Click the ScanWirelessAPs button. A list will appear of competing wireless
networks, including the channels they are using. Write down one or more
of the less used channel numbers, since a less used channel should be
better for your MG7315.
5. On the top of the page, click the Wireless Basic menu item.
On the Basic page, select the channel you want in the Channel pulldown,
6.
then click Save.
Do you have any other questions? We have lots more information at
www.motorolacable.com/mentor