Important Safety Instruction - RCF AYRA PRO 10 SUB Owner's Manual

Professional active subwoofer
Table of Contents

Advertisement

1.
Read and keep these instructions. Heed all warnings and follow all Instructions.
2.
Do not use this apparatus near water.
3.
Clean only with dry cloth.
4.
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions. Do not install this equipment in a confined or "boxed-in" space such as
a bookcase or similar unit, and maintain good ventilation conditions. The ventilation
should not be impeded by covering the ventilation openings with items such as
newspaper, tablecloths, curtains, etc.
5.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat. Do not place exposed flame
sources such as lighted candles on the apparatus.
6.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
7.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8.
Only use attachment/accessories specified by the manufacturer.
9.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
10. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
11. Power Sources : This product should be connected to a power supply only of the type
described in these operating instructions, or as marked on the unit.
12. Internal/External Voltage Selectors : Internal or external voltage selector switches, if
any, should only be reset and re-equipped with a proper plug for alternative voltage
by a qualified service technician. Do not attempt to alter this yourself.
13. Water and Moisture : This product should be kept away from direct contact with liquids.
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
14. Protective earthing terminal : The apparatus should be connected to a mains socket
outlet with a protective earthing connection.
Denmark (Danmark): Apparatets stikprop skal tilsluttes en stikkontakt med jord, som
giver forbindelse til stikproppens jord.
Finland (Suomi): Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Norway (Norge): Apparatet må tilkoples jordet stikkontakt.
Sweden (Sverige): Apparaten skall anslutas till jordat uttag.
15. When moving or not using the appliance, secure the power cord (e.g., wrap it with a
cable tie). Be careful not to damage the power cord. Before using it again, make sure
the power cord has not been damaged. If the power cord has been damaged at all,
bring the unit and cord to a qualified service technician for repair or replacement as
specified by the manufacturer.
• Disconnect power cord before servicing.
• Replace critical components. only with factory parts or recommended equivalents.
• For AC line powered units: Before returning repaired unit to user, use an ohmmeter to
measure from both AC plug blades to all exposed metal parts. The resistance should be
more than 2,000,000 ohms.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO
USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
ONLY.
IMPORTANT
SAFETY
INSTRUCTION
SERVICE INSTRUCTION
SAFETY NOTICES
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ayra pro10s sub

Table of Contents