Sony BRAVIA KLV-48R482B Operating Instructions Manual page 16

Screen
Wide Mode
For details about wide mode, see page 10.
Auto Wide
Automatically changes the wide mode
according to the input signal from an
external equipment. To keep your setting,
select [Off].
Hint
• Even if [Auto Wide] is set to [On] or [Off], you
can always modify the format of the screen by
pressing repeatedly.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts the
display area based upon the content or
[Off] to choose from the [Display Area]
options.
Display Area
Adjusts the picture display area.
Horizontal Shift
Adjusts the horizontal position of the
picture.
Vertical Shift
Adjusts the vertical position of the picture.
PC Settings
Selects screen mode or adjust the display
position of the picture when receiving PC
input signal.
16
GB
Channel Set-up
1 Digit Direct
When [1 Digit Direct] is set to [On], you can
select a channel using one preset number
button (0 - 9) on the remote control.
Auto Tuning
Tunes in all the available channels
Programme Sorting
Changes the order in which the channels
are stored on the TV.
Programme Labels
Assign a channel name of your choice up
to seven letters or numbers.
Manual Programme Preset
Before selecting [Label]/[AFT]/[Audio
Filter]/[Skip]/[Colour System], press PROG
+/– to select the programme number with
the channel. You cannot select a
programme number that is set to [Skip:]
(page 16).
Programme/TV System/Frequency:
Presets programme channels
manually.
Label: Assigns a name of your choice,
up to seven letters or numbers, to
the selected channel.
AFT: Allows you to fine-tune the
selected channel manually. When
[On] is selected, the fine tuning is
performed automatically.
Audio Filter: Improves the sound of
individual channels when distortion
occurs in mono broadcasts in TV
system [B/G], [I] and [D/K].
Note
• You cannot receive stereo or dual sound
when [Low]/[High] is selected.
Skip: Skips unused channels.
Colour System: Select the colour
system ([Auto], [PAL], [SECAM],
[NTSC3.58], [NTSC4.43] or [PAL60])
according to the channel.
Signal Level: Displays the signal level
for programme currently being
watched.