Table of Contents
Advertisement
Pump filter
It is advisable to clean the pump filter 5 or 6 times a year to prevent its clogging. A
clogged pump filter may reduce the bubble effect.
NOTE
If the pump filter is clogged, the "5C" information code appears on the washing machine's
display screen.
1. Turn off the washing machine, and
unplug the power cord.
2. Open the filter cover using a coin or
key.
3. Drain the remaining water inside the
drum. See the Emergency drain section
on page 43.
4. Turn the pump filter knob
counterclockwise, and then drain the
remaining water.
5. Clean the pump filter using a soft brush.
Make sure the drain pump propeller
inside the filter is not clogged.
6. Reinsert the pump filter, and then turn
the filter knob clockwise.
7. Close the filter cover.
NOTE
• Some pump filters feature a safety
knob that is designed to prevent
accidents by children. To open the
safety knob of the pump filter, push in
and turn it counterclockwise. The spring
mechanism of the safety knob helps
open the filter.
• To close the safety knob of the pump
filter, turn it clockwise. The spring
makes a rattling sound, which is normal.
English 45
Advertisement
Table of Contents
