Table of Contents
Advertisement
WARNING
If there is a water leak, stop operating the washing machine and disconnect from the
electrical supply. Then, contact a local Samsung service centre in case of a leak from
the water hose, or contact a plumbing technician in case of a leak from the water tap.
Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
Connecting to a non-threaded water tap
3. Open the water tap and check if there
1. Remove the adaptor (A) from the water
A
B
2. Use a Phillips screwdriver to loosen
are any leaks around the connection
areas. If there are water leaks, repeat
the steps 1-2.
hose (B).
four screws on the adaptor.
English 21
Advertisement
Table of Contents
