HYAG900E Disc Guard Assembly
!
WARNING! When mounting Guards to the HYAG900E, ensure it is
unplugged from a power source.
!
WARNING! YOU MUST attach the disc guard to machine, and
NEVER use the machine without it. This will cause injury and damage.
1.
Open the Guard Locking Lever (D), and place the Disc Guard (K)
onto the Gearbox (A). If the guard doesn't fit, use adjustment bolt
to adjust the guards clamping diameter.
2.
Close the Guard Locking Lever(D). Change the adjustment bolt to
fit snuggly around the Gearbox.
3.
Adjust the guard angle to either side, dependant on your
dominant hand. Also adjust it to direct sparks AWAY from yourself.
Assembly
Gearbox (A)
Adjustment Bolt
Guard Locking Lever (D)
www.hyundaipowerproducts.co.uk
16