Aparameter Display - Smeg GW0160 Series User Manual

BUTTONS
-
4.2.1 A PARAMETER DISPLAY
0
The A parameter can reach high values (eg typical A0 = 12000) and will appear on two consecutive screens;
0
thousands display screen (t-Thousands) and units screen (u-units), the value in thousands is indicated by the suffix "t"
units with the suffix" u ". The transition from one screen to the next occurs automatically after 3 seconds or by short
press of the "Functions" key.
User manual
DESCRIPTION
- PR 03
Door opening
The door is opened automatically by means of an electric lock; opening is only permitted
in conditions of safety for the user.
The user simply presses the button; there is no need to hold it down.
The button also provides an "Escape" function; it is pressed to quit the procedure for
displaying or modifying an appliance parameter. In this case, it has to be held down (2
seconds).
Selection
Program selection buttons. The letter "P" and the name of the selected program appear
on the display.
These buttons can be used to increase or decrease the current value during modification
of an appliance parameter.
fig. 5 – The A value is displayed split into thousands (t) and units (u)
0
GW0160 Series
called "phase 0".
If the user does not give any commands for 5 seconds, the
display shows the program selected.
Page 16 - 70