Table of Contents
Advertisement
3-7. Other interior features
■
The power outlets can be used when
12V: The "ENGINE START STOP" switch is in ACCESSORY or IGNITION
ON mode.
120V: The "ENGINE START STOP" switch is in IGNITION ON mode.
■
When using the instrument panel power outlet
You may be unable to use the USB port if a device is connected to the instru-
ment panel power outlet at the same time.
NOTICE
■
To avoid damaging the power outlets
Close the power outlet lid when not in use.
Foreign objects or liquids that enter the power outlet may cause a short cir-
cuit.
■
To prevent the fuse from being blown
12V: Do not use an accessory that uses more than 12V/10A.
120V: Do not use a 120V AC appliance that requires more than 100W.
If a 120V AC appliance that consumes more than 100W is used, the pro-
tection circuit will cut the power supply.
■
To prevent the battery from being discharged
Do not use the power outlet longer than necessary when the engine is not
running.
■
Appliances that may not operate properly (120V AC)
The following 120V AC appliances may not operate even if their power con-
sumption is under 100W.
●
Appliances with high initial peak wattage
●
Measuring devices that process precise data
●
Other appliances that require an extremely stable power supply
490
LC200_OM_OM60L83U_(U)
Advertisement
Table of Contents
