Turn Signal Lever - Toyota Land Cruiser 200 2015 Manual

2-1. Driving procedures

Turn signal lever

■
Turn signals can be operated when
The "ENGINE START STOP" switch is in IGNITION ON mode.
■
If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
180
LC200_OM_OM60L83U_(U)
Right turn
Left turn
Move and hold the lever
partway to signal a lane
change
The right hand signal will flash
until you release the lever.
Move and hold the lever
partway to signal a lane
change
The left hand signal will flash
until you release the lever.