PRISM® 4
• Accessible by All users
When the Run Schedule is NOT enabled, the system is started and stopped from this screen. It displays the pressure within the
Prism unit as well as the pressure in the return duct and VFD Data. A user can touch the left meter to change the display to either
Fan Speed, Motor Torque, Motor Power, or Bus Voltage.
• Accessible by All users
When the Run Schedule is enabled but NOT activated, the system will be started and stopped using the buttons on this
screen.
Main Screen
B-5
OPERATION
01 Jan 2022
2:16 pm
Admin
Active
01 Jan 2022
2:16 pm