Pioneer Elite PRO-1000HD Operating Instructions Manual page 11

Illustration depicts
PRO-1000HD model.
R 8 ~16
SPEAKER
+ –
1
INPUT3
AUDIO
R L
-
8
Synchronizing signal impedance selector switch
Depending on the connections made at INPUT2, it
may be necessary to set this switch to match the
output impedance of the connected component's
synchronization signal.
When the output impedance of the component's
synchronization signal is below 75 , set this switch
to the 75 position (pages 10, 12).
9
AUDIO INPUT (Stereo mini jack)
Use to obtain sound when INPUT1 or INPUT2 is
selected.
Connect the audio output terminal of components
connected to INPUT1 or INPUT2 to this unit (page 14).
0
AUDIO OUTPUT (Stereo mini jack)
Use to output the audio of the selected source
component connected to this unit to an AV amplifier
or similar component (page 14).
-
AUDIO INPUT3 (RCA Pin jacks)
Use to obtain sound when INPUT3 is selected.
Connect these jacks to the audio output connectors of
components connected to INPUT3 (page 14).
Note: The left audio channel (L) jack is not compatible
with monaural input sources.
=
INPUT3 (S-video jack)
For connection of components that have an S-video
output terminal such as a video deck, video camera,
LaserDisc player, or DVD player. (page 13)
CONTROL COMBINATION RS-232C
IN OUT
IN OUT
2 3 4
INPUT4
S-VIDEO AUDIO VIDEO OUTPUT
R L
= ~ ! @
Part Names and Functions
INPUT1 (ON SYNC)
OUTPUT
G B
ANALOG RGB (ANALOG RGB)
5 6
AC INLET
# $
~
AUDIO INPUT4 (RCA Pin jacks)
Use to obtain sound when INPUT4 is selected.
Connect these terminals to the audio output
connectors of components connected to INPUT4
(page 15).
Note: The left audio channel (L) jack is not compatible
with monaural input sources.
!
INPUT4 (BNC jack)
For connection of components that have a composite
video output terminal such as a video deck, video
camera, LaserDisc player, or DVD player (page 13).
@
OUTPUT (INPUT4) (BNC jack)
Use the OUTPUT (INPUT4) terminal to output the
video signal to an external monitor or other
component.
Note: The video signal will not be output from the
OUTPUT (INPUT4) terminal when the main power of
this display is off or in standby mode (page 13).
#
Main power switch
Use to switch the main power of the unit on and off.
$
AC INLET
Use to connect the supplied power cord to an AC
outlet (page 16).
%
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 –16
INPUT2 (H/V SYNC) AUDIO
R HD VD
INPUT OUTPUT
(INPUT1/2)
75 2.2
Ô
k
7 89 0
8 ~16
L
SPEAKER
+ –
%
(page 14).
7
PRO-1000HD / PRO-800HD