Table of Contents
Advertisement
DNS Address: Network Domain Name Server address.
MAC Address: The camera's MAC address.
Apply & Cancel Buttons: Apply or cancel the changes made to the LAN Settings section.
Port Settings: The Port Settings section allows you to adjust the network ports of the camera.
HTTP Port: This port is used for HTTP-CGI control, and for the web application. Default: 80.
RTSP Port: This port is used for the RTSP streaming protocol. Default 554.
PTZ Port: This port is used for the TCP/IP control protocol. Default: 5678.
UDP Port: This port is used for the UDP control protocol. Default: 1259
Sony VISCA: This port is used for the Sony VISCA protocol. You cannot change this port number.
SRT Settings: The Secure Reliable Transport protocol settings section allows you to adjust the SRT settings of the camera.
SRT: Enable / Disable SRT
SRT Port: This is the port used for the SRT protocol. Default: 4578.
SRT Encry: Enable / Disable SRT Encryption. Options include: Off, AES-128, AES-192, AES-256
SRT Password: Change the SRT Password when SRT Encryption is enabled. Default: 1234567891
Control Protocol Settings: The Control Protocol Settings section allows you to adjust the Pelco-D & Pelco-P control address.
Pelco-D Address: 0 ~ 254
Pelco-P Address: 0 ~ 31
RTMP Settings: The RTMP(S) Settings section allows you to enable or disable the two (2) RTMPS stream's video and
audio sources.
First Stream: Enable / Disable Stream 1 Video & Audio
(First Stream) MRL: Text field for RTMPS Stream 1's Media Resource Locator (MRL)
Second Stream: Enable / Disable Stream 2 Video & Audio
(Second Stream) MRL: Text field for RTMPS Stream 2's Media Resource Locator (MRL)
RTSP Settings: The RTSP Settings section allows you to enable or disable RTSP Authorization.
RTSP Auth.: Enable / Disable RTSP authorization.
ONVIF Settings: The ONVIF Settings section allows you to adjust the ONVIF settings of the camera.
ONVIF: Enable / Disable ONVIF protocol control.
ONVIF Auth.: Enable / Disable ONVIF authorization.
Multicast Settings: The Multicast Settings section allows you to adjust the Multicast settings of the camera.
Multicast: Enable / Disable the Multicast protocol.
Address: Adjust the Multicast address.
Port: This port is used for the Multicast protocol. Default: 6688.
SDK Settings: The SDK Settings section allows you to adjust the Software Development Kit settings of the camera.
Active Connection: Enable / Disable the SDK active connection.
Address: This is the IP address field of the SDK. Default: 192.168.100.138
Port: This is the port used for the SDK. Default: 1234
NTP Settings: The NTP Settings section allows you to enable / disable the Network Time Protocol of the camera.
Time Zone: Adjust the time zone you wish to use with NTP.
NTP Time Sync: Enable / Disable NTP Time Sync
Server Address: Text field for NTP server.
Time Interval: Adjust the Time Interval in minutes. Default: 1440
Prisual
Page 42
Support:
prisual.av@gmail.com
www.prisual.us
Advertisement
Table of Contents
