Table of Contents
Advertisement
7. Recalling Presets
Pressing any of the numeric buttons [0-9] directly will
recall a stored preset position and settings.
Note:
No action will be executed if a specific numeric preset
position has not yet been saved.
8. Camera Selection
Press the [1-4] button corresponding to the camera with
the IR address that you want to operate. This allows for
up to 4 cameras to be operated via the same IR remote in
the same room.
Prisual
Support:
prisual.av@gmail.com
9. Camera IR Address Set
Press 3 buttons in the sequence shown below to
set/change the camera's IR address. This allows up to 4
cameras to be controlled from the same IR remote control.
Be sure that only one camera is picking up the IR signal
when you perform this function. If multiple cameras
receive the command, they will all change to the new
address.
Address 1: [*] + [＃] + [F1]
Address 2: [*] + [＃] + [F2]
Address 3: [*] + [＃] + [F3]
Address 4: [*] + [＃] + [F4]
10. Image Freeze
Press the [
] button to freeze or unfreeze the video
image. This can be useful while recalling presets to hide
camera
motion
Page 12
www.prisual.us
from
your
viewers.
Advertisement
Table of Contents
