Hisense 32H4G5 Quick Start Manual page 8

Attach the wall mount bracket (not included)
Before you begin the third-party
manufacturer instructions, be sure to do the
following things:
1. Place the TV face down on a clean, safe
and cushioned surface.
2. Remove the TV stand if you have
already attached it.
3. Place spacers (not included) in the
corresponding bracket holes.
CAUTION:
• Follow instructions provided with the wall mount bracket. If it is not correctly mounted,
the TV may fall and cause property damage or personal injury.
• When you attach the mount, be sure to use spacers (provided by the third-party
manufacturer) between the TV and the bracket.
• To prevent internal damage to the TV and to ensure it is mounted securely, be sure
to use fixing screws (not included) that are 8.0 - 10.0 mm in length when measured
from the attaching surface of the rear cover.
• Make sure the tilt angle between the TV screen and the vertical surface is no more
than 15 degrees.
≤15°
TV screen
Wall mount hole pattern (mm)
Wall mount screw size
NOTE:
• If you have additional questions, please contact the wall mount manufacturer or the
retailer from which you purchased the TV.
• The diameter and length of the screws differ depending on the wall mount bracket
model.
Vertical
surface
Rear cover of the TV
100 × 200
M6
Spacer
(not included)
8.0 - 10.0 mm
6
Screw
(not included)
Bracket
(not included)
Wall mount bracket
Screw
Spacer