After The Location Is Decided; Setting A Route To Your Destination - Pioneer AVIC-U220 Operation Manual

After the location is decided

Setting a route to your
destination
1 Search for a location.
= For details, refer to Chapter 6.
After searching for the destination, the Lo-
cation confirmation screen appears.
2 Touch [OK].
Location confirmation screen
The destination is set, and then route calcula-
tion starts.
When the route calculation is completed,
Route confirmation screen appears.
# Touch [Scroll].
The map display changes to the scroll mode. You
can fine-tune the location in the scroll mode, and
then you can set the location as your destination
or do various operations.
# Touch [Waypoint].
The location is added to the "Waypoints List"
screen.
p If a destination is not set, [Waypoint] is not
available.
3 Touch [OK].
Route confirmation screen
1 2
Sets the displayed route as your route, and
starts the route guidance.
3 4
1 Distance to the destination
2 Travel time to your destination
3 Estimated fuel cost to your destination
= For details, refer to Inputting the fuel
consumption information for calculating
the fuel cost on page 44.
4 Route calculation condition
# Touch
.
The message confirming whether to cancel the
calculated route appears.
Touch [Yes] to cancel the calculated route, and
then the map screen appears.
1
2
3
1 Options
= For details, refer to Modifying the route
calculation conditions on the next page.
2 Profile
= For details, refer to Checking the current
itinerary on page 35.
3 Waypoints
= For details, refer to Editing waypoints on
page 35.
Chapter
07
33
En