Pioneer AVIC-N3 Installation Manual page 9

30-pin cable (supplied)
3 m (9 ft. 10 in.)
Black
IP-BUS cable
(supplied with iPod adapter)
Hide-away XM tuner
(GEX-P10XMT)
(sold separately)
Black
Black
Note:
The XM tuner will not receive XM Radio service when
you drive outside of the XM's coverage area. When the
XM tuner is not used, connect the IP-BUS cable*1
directly to the navigation's Hide-away unit*2.
Note:
When Pioneer multi-channel processor (sold separately) is
connected to this product, make sure the "5.1 CH" mode is
activated. Please find the correct setting by referring to
"Switching the 5.1ch setting" in the Operation Manual of the
navigation system.
20 cm (7-7/8 in.)
20 cm (7-7/8 in.)
Display unit
Yellow
Power cord
Blue
*1
WIRED REMOTE INPUT
Please see the Instruction
Manual for the Wired Remote
Control adapters (sold separately).
MIC INPUT
The microphone in the voice
recognition kit (e.g. CD-VC1)
(sold separately) is connected
when the voice recognition
function is used.
DIGITAL OUT
This is used when connecting
to the Pioneer multi-channel
processor (sold separately), that is
compatible with this product.
Otherwise this is not used.
G.SP (Guidance speaker output)
This is not used normally.
When combining this product with
Pioneer multi-channel processor
(sold separately) that is compatible
with the product, G.SP will be
used to output the guidance voice.
In this case, the Pioneer external
speaker (e.g. CD-TS37GP) (sold
separately) must be connected to
the SP-OUT jack (2.5 ø MINI
JACK, 1W max [16 Ω]).
For details, see the operation
manual of the external speaker.
XM DATA cable
(supplied with XM tuner)
• When combining this product with
GEX-P10XMT (sold separately), this
connection must be required.
• When installing the XM tuner in the
trunk, etc., the extension cable (e.g. CD-
600DC) (sold separately) is required.
8