Controlling The Camera Using An Android Smartphone (Nfc One-Touch Remote) - Sony DSC-RX100M6 Help Manual

Help Guide
Digital Still Camera
DSC-RX100M6

Controlling the camera using an Android smartphone (NFC One-touch remote)

You can connect this product to an NFC-enabled Android smartphone by touching them together and then operate the
product using the smartphone.
Make sure that [Ctrl w/ Smartphone] is set to [On] by selecting MENU →
Activate the NFC function of the smartphone.
1
Switch this product to shooting mode.
2
The NFC function is available only when the
Touch the smartphone to the product.
3
The smartphone and the product are connected, and PlayMemories Mobile launches.
You can shoot an image by remote control while checking the composition of the image on the smartphone
screen.
Touch the smartphone to the product for 1-2 seconds until PlayMemories Mobile launches.
About "NFC"
NFC is a technology that enables short-range wireless communication between various devices, such as mobile phones
or IC tags, etc. NFC makes data communication simpler with just a touch on the designated touch-point.
NFC (Near Field Communication) is an international standard of short-range wireless communication technology.
Note
If you cannot make a connection, do as the following:
Launch PlayMemories Mobile on your smartphone, and then move the smartphone slowly toward the
product.
If the smartphone is in a case, remove it.
If the product is in a case, remove it.
Check whether the NFC function is activated on your smartphone.
(Network) → [Ctrl w/ Smartphone].
(N mark) is displayed on the screen.
313
(N mark) of this