Turning The Screen Saver On And Off; Changing The Background Color Of The Screen - Pioneer DV-F727 Operating Instructions Manual

Changing the password
Change your password whenever you feel it is
necessary. However, if you forget your existing
password, you cannot enter this screen to change it.
Audio1 2
Setup Menu Mode
Setup Navigator
Parental Lock
Setup viewing restrictions
1
Select "Password Change" in the [Parental
Lock] setting and press ENTER.
The screen changes to the password input screen
as shown in the section 'Entering the password' on
the previous page.
2
Enter your current password.
To enter the password, refer to 'Entering the
password' on the previous page.
If you have not yet set a password, you cannot
select this setting. Establish a password by
selecting "Level Change" first.
3
Move the cursor control joystick or the
number buttons to enter the new password.
4
When the new password has been entered,
press ENTER.
The new password is set and the screen returns to
the General menu screen. To go back to the
General menu screen without making any changes,
press RETURN
Turning the Screen Saver On
and Off
Expert
As a protective function against residual images on the TV
screen or monitor, a phenomenon referred to as "screen
burn", the screen saver appears when the same screen
has been displayed for a length of time.
Make changes to the [Screen Saver] setting in the Setup
screen General menu in the "Expert" menu mode (page 40).
Audio1 2
Setup Menu Mode
Setup Navigator
Parental Lock – Level 8
Screen Saver
Background Color -
External Input – Off
Settings: On
Off*
70
Video Language General
– Basic
Level Change
Password Change
Move Select Exit
ENTER SETUP
.
Video Language General
– Expert
On
Off
Move Exit
SETUP
*Factory setting
Changing the Background
Color of the Screen
You can select a blue or black background to appear
when the player is in the stop mode.
Make changes to the [Background Color] setting in the
Setup screen General menu in the "Expert" menu
mode (page 40).
Audio1 2 Video Language
Setup Menu Mode
Setup Navigator
Parental Lock – Level 8
Screen Saver – On
Background Color
External Input – On
Move
Settings: Black
Blue*
Other
When "Other" is selected
This player gives you the option of creating your own
background color by adjusting the red, green and blue
levels.
Audio1 2 Video Language
Background Color
Move
–/+
ENTER
1
Move the cursor control joystick up or down
to select a color bar.
The selected color bar becomes highlighted.
2
Move the cursor control joystick right or left to
adjust the level of the color.
As the color bar is adjusted, the square on the right
side of the screen indicates how the current mix of
the three colors appears.
3
Repeat steps 1 and 2 until you have achieved
a color that you like.
4
Press ENTER to set the color as the
background color.
Expert
General
– Expert
Black
Blue
Other
SETUP Exit
*Factory setting
General
Return
Select Exit
SETUP