LEXIBOOK MP300 Series - Digital Player With Mics Manual

Table of Contents

Contents

1 SAFETY INSTRUCTIONS
2 POWER SUPPLY
- 2.1 Battery installation
- 2.2 AC operation
3 LOCATION OF CONTROLS
4 FUNCTIONS & MODES
5 SPECIFICATIONS
6 Documents / Resources
- 6.1 Download manual

SAFETY INSTRUCTIONS

PLEASE READ BEFORE OPERATING THIS EQUIPMENT.

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.

Read this Instruction Manual before you attempt to connect or operate the appliance.
Keep these instructions in good condition. Heed all warnings. Follow all instructions.
Save this Instruction Manual for future reference.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product. Dry location use only.
No naked flame source, such as candles, should be placed on the product.
Ventilation should not be impeded by covering the ventilation openings.
Only use accessories, which are specified by the manufacturer.
Use replacement parts, which are specified by the manufacturer.
Install the unit in accordance with the manufacturer's instructions.
Place the unit where there is good ventilation. Place the system on a flat, hard and stable surface. Do not expose to temperatures above 40°C. Allow at least 10 cm clearance from the rear and the top of the unit and 5 cm from each side.
Press the player's buttons gently. Pressing them too hard can damage the player.
Dispose of used batteries in an environmental-responsible manner.
Always ensure that the product is unplugged from the electrical outlet before moving or cleaning. Clean it with dry cloth only.
Turn off the product during lightning, storms or when it will not be used for long periods of time.
This product has no user-serviceable parts. Do not attempt to repair this product yourself. Only qualified service personnel should perform servicing. Take the product to the electronics repair shop of your choice for inspection and repair.
NEVER let anyone, especially children, push anything into holes, slots or any other openings in the unit's casing as this could result in a fatal electric shock.
Don't mount this product on a wall or ceiling.
Do not place the unit near TVs, speakers and other objects that generate strong magnetic fields.
Do not leave the unit unattended when it is in use.
Keep minimum distances around the apparatus for sufficient ventilation.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
The use of apparatus in tropical and/or moderate climates.
Batteries should be disposed properly. Take them to the collection container in order to protect the environment.

All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this product and should be discarded.

POWER SUPPLY

Your musical player operates with 4 x 1.5V C/LR14 size batteries (not included) or with a power source DC 5V 1A thanks to micro USB cable (included)

Battery installation

Open the battery compartment cover located at the back of the unit.
Insert 4 x 1.5 C/LR14 size batteries (not included) observing the polarity indicated in the compartment.
Close the battery compartment.

Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the product before being charged. Rechargeable batteries are only to be charged under adult supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the product. The supply terminals are not to be short circuited. Do not throw batteries into a fire. Remove the batteries if you are not going to use the game for a long period of time. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

AC operation

Check that the unit is switched off.
Insert the small end of the micro USB cable into the micro USB port on the back of the unit.
Connect the other end of the micro USB cable into the USB port of your powered computer or USB type power adaptor and connect it to a wall socket

The digital player also works with:

micro USB cable (included)
power adaptor (not included)

warning Note: the USB cable and adaptor don't recharge the unit.

Malfunction or loss of memory may be caused by strong frequency interference or electrostatic discharge. Should any abnormal function occur, remove the batteries and insert them again, or unplug the USB cable and re-plug it again.

LOCATION OF CONTROLS

Handle
RECORDING buttons
MODE button
Backward button
Forward button
PLAY/PAUSE button
VOL – button
VOL+ button
LIGHT EFFECTS button
Mic ON/OFF button
Button to activate the voice changer effects
Speaker
USB port for audio playback
AUX IN Jack
Micro USB port
On/Off button
Headphone jack
TF card slot
Battery compartment

FUNCTIONS & MODES

MODES
Your digital player includes 4 modes: Wireless, USB, TF and Aux-in.

For the USB and TF card modes, power on the unit and insert a USB Flash Drive or a TF card (not included) into the port. The player will automatically start playing music.

In Aux-in mode, the PLAY/PAUSE, PREVIOUS and NEXT buttons on the speaker are disabled. Please use the control buttons on your music player to get the best control experience of the music

Wireless connexion

PAIRING

Turn the unit on, a signal will sound to notify the device is ready to be paired.
Activate the Bluetooth® function on your personal device and make sure it is in discoverable mode.
Confirm pairing or select the name "MP300" to connect your player to the unit.

warning Note: Some music players do not fully support wireless audio controls. Play/ pause, previous and next buttons on the audio player may not respond. The music player may also turn off. To get the best control experience in the said player, use the on-screen track controls of your music player rather than those on the speaker.

FUNCTIONS

Press on the button 3 to select the desired mode. The corresponding name will appear on the screen
In wireless, USB and TF modes, press for playback or pause the music.
In wireless, USB and TF modes, press or to go to the previous or next track.
In all modes, press - or + to decrease / increase the volume

Too high volume can damage your hearing. For this reason, please turn the volume down.

Microphone function: take your microphone and push the switch from off to on. Press repeatedly the button below the ON/OFF one to activate the voice changing effect.
RECORDING function: Insert a TF card or a USB key and press the button 2 (left) to start recording your voice. Press the button 2 (right) to stop the recording.
When you are listening to your music using the Aux-in mode, you can even record yourself singing along with the music on a TF card or USB key (also press the buttons 2 to start/stop the recording).

the record function is not compatible with the Bluetooth® (wireless) mode.