Installing The Canopy; Installing The Blades - Hunter 52485 Installation Manual

1886
Put the blade washers, found in the
blade screws, found in the
blade screws to secure each blade to a blade iron.
Repeat x5
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades

hardware bag, onto the
hardware bag. Then install the
Hanging Fan
Insert the two canopy screws
found in the
Note:
Fan style may vary.
Lightly attach the blade arms to the motor with screws
found in the hardware bag, then securely tighten
after both screws are attached.
Repeat x5
Ridge
Wiring Canopy
hardware bag.
Canopy Screw
bag
Blade Screw
bag
Washer
bag
Blade Arm Screw
bag
Note:
Fan style may vary.
Blades Light
x2
x15
x15
x10
Glass/Bulbs