When Connecting With A Multi-Channel Processor; When Connecting With A Rear View Camera; When Connecting The External Video Component And The Display - Pioneer AVX-P8DVD Installation Manual

Connecting the Units

When connecting with a multi-channel processor

RCA cable (supplied with multi-channel
processor controller)
Car stereo with
RCA output
IP-BUS cable
(supplied with multi-channel processor)
Multi-channel processor
controller (e.g. AXM-P8000)
(sold separately)
Blue
Multi-channel processor
(e.g. DEQ-P8000)
(sold separately)
RCA cable (supplied with
multi-channel processor)
Black Blue
Optical cable (supplied with
multi-channel processor)
IP-BUS cable
Blue
(sold separately)
40 cm
(1 ft. 4 in.)
Black
This product

When connecting with a rear view camera

When using this product with a rear view camera, automatic switching to video from a rear
view camera when the gear shift is moved to REVERSE (R) position is possible.
WARNING:
• USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY OR DAMAGE.
CAUTION:
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or
backing into a tight parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
Fig. 5
This product This product
CAUTION CAUTION
Pioneer recommends the use of Pioneer recommends the use of
a camera which outputs mirror a camera which outputs mirror
reversed images, otherwise reversed images, otherwise
screen image may appear screen image may appear
reversed. reversed.
RCA cable RCA cable
20 cm 20 cm (sold separately) (sold separately)
(7-7/8 in.) (7-7/8 in.)
Rear view camera Rear view camera
Video input 2 Video input 2 To video output To video output
(VIDEO 2/BACK CAMERA INPUT) (VIDEO 2/BACK CAMERA INPUT)
8 m 8 m Extension lead (supplied) Extension lead (supplied)
(26 ft. 3 in.) (26 ft. 3 in.)
Violet/white Violet/white Fuse resistor Fuse resistor
Of the two lead wires connected to the back Of the two lead wires connected to the back
lamp, connect the one in which the voltage lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to (R) position. This connection enables the unit to
sense whether the car is moving forwards or sense whether the car is moving forwards or
backwards. backwards.
Connection method Connection method
1. 1. Clamp the lead. Clamp the lead. 2. Clamp firmly with 2. Clamp firmly with
needle-nosed needle-nosed
pliers. pliers.
Note: Note:
• It is necessary to set to AV INPUT2 in SETUP when • It is necessary to set to AV INPUT2 in SETUP when
connecting a rear view camera. connecting a rear view camera.
Fig. 6
<ENGLISH>

When connecting the external video component and the display

This product
28 cm
RCA cables
(11 in.)
(sold separately)
Video input 1
(VIDEO 1 INPUT)
To video output
External video
component
(sold separately)
Audio input 1
To audio outputs
(AUDIO 1 INPUT)
Video input 2
(VIDEO 2/BACK CAMERA INPUT)
Audio input 2
20 cm
(AUDIO 2 INPUT)
(7-7/8 in.)
Rear video output
(REAR VIDEO OUTPUT) To video input
Display with
RCA input jacks
(sold separately)
15 cm
Rear audio output
To audio inputs
(5-7/8 in.)
(REAR AUDIO OUTPUT)
RCA cables
(sold separately)
• It is necessary to set to AV INPUT1 and AV INPUT2 in SET UP when connecting the
external video component.
When using a display connected to rear video output
This product's rear video output is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
WARNING:
• NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while
Driving.
• NEVER connect rear audio output (REAR AUDIO OUTPUT) to sold separately power amp.
Fig. 7