Table of Contents
Advertisement
Setting
Power On Trigger
Sleep Mode
Sleep Mode Timer
A/V Mute Timer
Lens Cover Timer
Standby Mode
Options
Plug-in Detection
Signal Detection
On
Off
1 to 30 minutes
On
Off
On
Off
Communication On
Communication Off
227
Description
Selects the power on condition
when Auto Power On is set to
HDMI1:
• Plug-in Detection:
automatically turns on the
projector when the device
connected to the HDMI1 port is
turned on
• Signal Detection:
automatically turns on the
projector when it detects an
HDMI video signal on the
HDMI1 port; selecting this
option increases standby
power consumption
Automatically turns off the
projector after an interval of
inactivity
Sets the time before the projector
automatically turns off (Sleep
Mode must be turned on)
Automatically turns off the
projector after 30 minutes of
inactivity
Automatically turns off the
projector after 30 minutes if the
lens cover is closed.
Enable this setting to allow
monitoring and control of the
projector over a network when
the projector is in standby mode
(setting is displayed only when
A/V Output is set to While
Projecting).
Advertisement
Table of Contents
