When The Upper Thread Has Broken Or Run Out While Sewing - Janome MC 230E Instruction Book

4 5 6
7
w
r
q
e
v Lower the presser foot. Press the Start/Stop button
and sew 5 to 6 stitches.
b Press the start/stop button again to stop the
machine. Raise the presser foot. Trim the thread.
n Lower the presser foot and press the start/stop
button. The machine will sew the first color section
and stop automatically when it has finished.
m Change the thread and sew the next section.
When the upper thread has broken or run out
while sewing
Raise the presser foot and rethread the needle thread.
* If the carriage position makes threading difficult,
you can move the hoop for easier threading by
pressing the home position key q.
After rethreading the needle thread, press the home
position key q again to return the carriage to the
previous position.
q Home position key
Press the stitch back key w or stitch forward key r to
move the embroidery hoop to where the thread has
broken or run out e .
Press the stitch back key once w to move the hoop back
by 10 stitches.
w Stitch back key
e Broken point
r Stitch forward key
Lower the presser foot, and press the start/stop button
and sew 5 to 6 stitches. Stop the machine and trim the
thread.
Press the start/stop button and start the machine again.
26