Din Rear-Mount - Pioneer AVIC-D2 Installation Manual

DIN Rear-mount

Installation using the screw holes on the
side of this product
1. Remove the side brackets.
Screw for fixing the side bracket (5 × 6 mm)
2. Fastening this product to the fac-
tory radio-mounting bracket.
Position this product so that the brack-
ets screw holes and its screw holes are
aligned (are fitted), and tighten the
screws at 3 or 4 locations on each side.
Use either the binding screws (5 × 6
mm) or flush surface screws (5 × 6
mm), depending on the shape of the
bracket's screw holes.
Factory radio mounting bracket
Binding screw or
flush surface screw
Be sure to use the
screws supplied
with this product.
If the pawl
gets in the
way, bend it
down
Dashboard or console
3. Attach the frame if applicable.
When attaching the frame, attach it
with the grooved side pointing down-
wards.
Attach the frame with
this part facing down-
wards.
22