Table of Contents
Related Manuals for Mikado LOGO 550 SX
Summary of Contents for Mikado LOGO 550 SX
- Page 1 Manual www.mikado-heli.de LOGO 550 SX Mikado Model Helicopters GmbH • Friedrich-Klausing-Straße 2 • 14469 Potsdam • Germany phone +49 (0)331 23749-0 • fax +49 (0)331 23749-11 • www.mikado-heli.de © Mikado Model Helicopters GmbH 2015, V1.0014...
-
Page 2: Table Of Contents
7 Mounting the Motor ....9 LOGO 550 SX is not recommended for novices. This heli- 8 Canopy Mounting ....9 Ball copter is a complex system. -
Page 3: Mainframe
For reading on how to mount All parts shown in the boxes are displayed in real size. dome head M3x16 the motor pinion, please fl ip to page 9. Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 3... -
Page 4: Tail Rotor
Make sure the tail rotor shaft has no axial play 5x13x4 and is not tightly braced between the bea- 3x5x0,5 rings. Use shims 5 x 10 x 0.2 mm if needed. 5x7x2,3 M3x14 3x5x0,5 3x6x2,5 Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 4... -
Page 5: Tail Boom
Bag 6 + 11 Ø5x450 mm 5 Min. Epoxy Attach the ball links so that the engraved number is on the outer surface pointing towards you. Ball Ø6 mm Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 5... -
Page 6: Main Gear & Tail Boom Assembly
Swashplate bag 3 M3x8 M3 Stopp (4) M3x10 M3x10 Secure scids using set screws 3x3. Tighten the pivot bolts very carefully. Do not (7x) overtighten them, as they will break off. Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 6... -
Page 7: Bar Rotor Head
Rudder Apply a small amount of oil to the rotor shaft. Attach the ball links so that the engra- ved number is on the outer surface pointing towards you. Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 7... -
Page 8: Servo Installation
fi rst. M4x12 8x11x0,5 3x12 3x7x3 8x14x4 M3x20 6x14x5 3x5x2 3x6x2,5 M3x22 10,5x14x1 M3x20 M3x22 M4x12 M4x25 4x12x1 3x5x0,5 M4 Stop M3x20 Ø4,8x3 3x12 3x7x3 3x6x2,5 3x5x2 M3x20 M2,5x40 Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 8... -
Page 9: Mounting The Motor
( 5x10x1 10x16x0,5 10x16x0,5 inbetween. Also make sure that the M3 set screw sits on the flattened area of the motor shaft. Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 9... -
Page 10: Radio And Battery
Attach the battery with the 3 velcro straps. Mount the battery in a position where the center of gravity is met with the battery holder installed. Velcro (adhesive) Velcro Strap Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 10... -
Page 11: Overview Chassis
4067 2074 1958 4917 4913 1344 4914 1954 4622 (6mm Motorshaft) 1974 4714 (5mm Motorshaft) 4311 white 4916 1920 2775 black 4290 black LOGO 500/600/690 4288 white LOGO 500/600/690 Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 11... -
Page 12: Overview Tail Rotor
4355 LOGO 600 SE 4354 (SET) LOGO 600 SE 4721 500 SX 4720 (SET) LOGO 550 SX 4081 (730XL LOGO 600) 4325 (770XL LOGO 600 SE) 4076 (638XL LOGO 550 SX) Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 12... -
Page 13: Overview V-Bar Head
2351 2347 2076 4750 4618 951 (8x11x0,5) 4133 1916 1588 (40mm) 2330 1565 www.mikado-heli.de Construction & Rendering: Mehran Mahinpour Tirooni, André Doil • Layout & Realisation: CDT, André Doil Manual LOGO 550SX - ©Mikado Model Helicopters GmbH - Page 13...
Need help?
Do you have a question about the LOGO 550 SX and is the answer not in the manual?
Questions and answers