Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mikado LOGO 550
Summary of Contents for Mikado LOGO 550
- Page 1 Manual www.mikado-heli.de LOGO 550 Mikado Model Helicopters GmbH • Graf-von-Schwerin-Str. 40 • 14469 Potsdam • Germany phone +49 (0)331 23749-0 • fax +49 (0)331 23749-11 • www.mikado-heli.de © Mikado Model Helicopters GmbH 2017, V1.0022 © Mikado Model Helicopters GmbH 2017, V1.0022...
-
Page 2: Table Of Contents
Turn off all power switches and always be assisted by an experienced pilot and never disconnect the batteries. Investigate the reason and fl y alone! Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 2... -
Page 3: Mainframe
M2,5x10 M2,5 Stop M2,5x16 (4x) do not tighten screws yet M3x20 M2,5x6 Ø5x49 All parts shown in the boxes are displayed in real size. raised head M3x16 M3 Stop Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 3... -
Page 4: Tail Rotor
Make sure the tail rotor shaft has no axial play and is not tightly braced between the bea- 3x5x0,5 rings. Use shims 5 x 10 x 0.2 mm if needed. M3x14 3x5x0,5 3x6x2,5 Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 4... -
Page 5: Tail Boom
Bag 6 + 11 Ø5x450 mm Ø5x450 mm 5 Min. Epoxy Attach the ball links so that the engraved tread is on the inner surface pointing away from you. Ball Ø6 mm Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 5... -
Page 6: Main Gear & Tail Boom Assembly
•After inserting a battery, rotate back to secure the battery plate in place. M3x10 Secure scids using set screws 3x3. Tighten the pivot bolts very carefully. Do not (7x) overtighten them, as they will break off. Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 6... -
Page 7: Bar Rotor Head
Rudder Apply a small amount of oil to the rotor shaft. Attach the ball links so that the engra- ved number is on the outer surface pointing towards you. Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 7... - Page 8 4x12x1 M3x16 M4x12 M4x12 M4x12 28 mm 4x12x1 M4x25 Large inner diameter M3x8 M3x8 M3x8 Small inner Threadlock diameter M4 Stop Ø4,8x3 3x12 3x7x3 3x6x2,5 M3x20 3x5x2 M3x20 M2,5x40 Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 8...
-
Page 9: Mounting The Motor
. Make sure that the M3 set screw cluded in the kit) and fi x it with speed glue. sits on the flattened area of the motor shaft. Anti Static Kit Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 9... -
Page 10: Radio And Battery
Attach the battery with the 3 velcro straps. Mount the battery in a position where the center of gravity is met with the battery holder installed. Velcro (adhesive) Velcro Strap Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 10... -
Page 11: Overview Chassis
1941 4912 4059 4067 2074 1958 4917 4913 4914 1954 4714 (5mm Motorshaft) 1974 4311 white 5110 5110 1920 2775 black 4290 black LOGO 500/600/690 4288 white LOGO 500/600/690 Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 11... -
Page 12: Overview Tail Rotor
2462 2074 2466 1956 4080 4634 4941 (95mm) 4926 4630 2074 4717 (22mm) 4718 (22mm) 5102 4715 LOGO 550 (640mm) 4721 4720 (SET) LOGO 550 4076 (638XL LOGO 550) Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 12... -
Page 13: Overview V-Bar Head
2076 4750 4618 951 (8x11x0,5) 4133 1574 1916 2330 1588 (40mm) 1565 1952 www.mikado-heli.de Construction & Rendering: Mehran Mahinpour Tirooni, André Doil • Layout & Realisation: CDT, André Doil Manual LOGO 550 - ©Mikado Model Helicopters GmbH - Page 13...
Need help?
Do you have a question about the LOGO 550 and is the answer not in the manual?
Questions and answers